Holds
Holds are vital assets in your scooter because of they help take up stun from drops and holes. Grasps will normally put on and tear after consistent use. In the event that your holds are torn or worn, the most effortless approach to switch them is with an air blower. Turn the blower on after you embed it's spout between the holds and bars. This technique slackens the grasp by making zone between the bars and the holds. After fairly pull and pull, your past worn grasps should slide off easily. Utilize this comparable technique to utilize new grasps.
Free Parts
In the event that you find your scooter somewhat flimsy, inspect your wheel axles, braces, brakes or pressure for needed fixing. All you need is an allen key (hex key) that estimates 4mm, 5mm and 6mm. Brakes by and large require a 4mm allen key while the axles, braces and pressure frequently require a 5mm or 6mm allen key. So give your scooter a quick examination and fix any detached components. This should exclusively take two or three minutes. Continuously remember, righty tighty lefty loosey!
In the event that you wouldn't have an allen key (hex key), you should buy a Park Tool AWS-1 at our retailer or on our site.
Greasing up your Bearings
There are six bearings on a scooter (two in each haggle inside the headset). So as to ensure that your scooter is constantly working at its generally potential, you have to keep the wheel bearings and headset bearings lubricated. Greasing up the wheel bearings is a touch of cake! Spot a drop of speed cream or an ointment of your choice on all sides of the wheel inside the bearing and gives your wheel a turn. This should equitably convey the ointment. So as to oil the headset bearings you should initially slacken your pressure and remove your bars and forks so you've section to the bearings. When you've gotten section to the headset bearings you apply some ointment on the bearings and turn them to uniformly disseminate the oil.